Lithium polymer (LiPo) batteries are rechargeable lithium-ion batteries featuring solid electrolyte technology that makes them thinner and lighter in weight than their traditional counterparts.
As they can be charged with batteries, these capacitors make the perfect battery pack solution for mobile phones and other battery-powered equipment. Furthermore, hobby electronics enthusiasts use them in remote-controlled drones.
Energy density
An energy density measurement describes a battery’s ability to store an equal amount of electrical charge within a specified area in relation to volume. Its value can be calculated using the thermodynamic formula: e = DG / ma, where DG represents change in Gibbs energy of the redox reaction and ma represents mass of all active substances within its cell. Energy density serves as one measure of battery performance and lifespan evaluation; however, other considerations must also be taken into account such as cycle stability and rate capability when selecting batteries for specific applications.
Lithium polymer batteries have seen significant improvements to their energy density through the use of solid polymer electrolytes, specifically those made of solid-polymers. This approach prevents Li dendrite formation while increasing mechanical strength of electrodes. Furthermore, this electrolyte improves its ionic conductivity allowing faster charging/discharging rates.
Charging occurs via an external circuit that applies an overvoltage to the battery, driving electrons from its positive electrode to its negative electrode via intercalation and lithium ions moving between both poles of the battery. This provides it with its chemical energy source that it stores as charge in its electrode materials.
Lithium’s high level of reactivity requires using an inorganic electrolyte, such as ethylene carbonate or propylene carbonate with complexes of lithium present, in order to ensure safe operation of an electrode material that requires coating with highly conducting layers for proper functioning.
Solid-state electrolytes have lower resistivities than liquid ethylene carbonate and can withstand higher temperatures, providing the potential to significantly increase energy density of lithium batteries and are currently being explored by several companies.
Metal-air batteries provide another possible solution, using metal foil as an anode and air as cathode. This battery type offers higher theoretical energy density while being more eco-friendly than traditional lithium-ion cells; faster charging times, longer lifespan and a reduced cycling capacity that could potentially damage its cells when subjected to extreme use rates.
Power density
Lithium polymer batteries are rechargeable batteries that use solid polymer electrolytes instead of liquid ones for better energy density and flexibility. Their increased energy density enables it to be used in devices with unique form factors; such as drones, radio-controlled models and wearable devices where weight reduction is an imperative. They’re often found powering these gadgets.
Lithium polymer batteries typically offer an energy density between 100 to 200 watt-hours per kilogram, which plays a crucial role in determining how much electricity can be generated within given weight and volume parameters. As energy density decreases, so must its footprint, which can present challenges when dealing with certain applications.
Lithium polymer batteries use an electrolyte composed of ion-conductive solid polymers such as polyethylene oxide (PEO), high molecular weight poly(trimethylene carbonate) (PTMC), and polypropylene oxide (PPO). Furthermore, LiTFSI or Li-NMC is often added as a solvent-free salt solution to further decrease viscosity of liquid electrolyte solutions.
When activated, batteries work by moving ions from the anode across to the cathode through current, which creates an electrochemical redox reaction which releases electrons that deposit themselves on the cathode and thus become reduced compared to their initial state as oxidized material. As energy from these electrons moves through conductors into external circuits they can generate electricity that powers it.
Lithium polymer batteries offer greater versatility compared to their traditional lithium-ion counterparts, boasting smaller footprints and being more flexible in shape, fitting easily into devices with limited room for large cells – perfect for wearable devices and drones where space is at a premium.
Development of more resilient and secure lithium-polymer battery electrolytes is a priority research area. To achieve this goal, scientists have explored inorganic fillers such as lithium titanate and magnesium silicate; these fillers help stiffen solid polymer electrolytes, prevent dendritic growth of Li and improve cycling stability of SEI film cells.
Chargers
Lithium polymer batteries require a charger capable of monitoring and controlling its current, voltage, temperature, and protection circuitry to protect it from overcharging or damaging internal components. They can be used in various portable electronic devices that need frequent charging; efficient charging methods will enable these devices to reach their full potential over time.
Lithium polymer batteries have received some negative attention due to reports of them spontaneously combusting, but such reports are often exaggerated and overblown. Overheating is typically responsible for such incidents, which leads to runaway chemical reactions which eventually cause fires – therefore, it is vital that charging units do not remain connected during use, nor leave their switch turned on while charging. For safe charging practices it is imperative that battery are unplugged while charging, with their cable properly secured onto an ESC controller.
As batteries are charged, lithium ions migrate from their positive electrode to their negative electrode, creating lithium oxide as they travel. This chemical reaction causes corrosion or “rust”, and as it accumulates it causes internal resistance levels to rise resulting in higher internal resistance requirements for operation of the battery.
Researchers have been making efforts to enhance the performance of lithium polymer batteries. By employing solid polymer electrolytes that increase conductivity, researchers have achieved increased cycle and rate capability as well as surface improvements of lithium metal using nanotechnology.
An effective way to increase the performance of a lithium polymer battery is with a thermal management system, such as an electronic chip that helps control its charge rate and voltage, detect thermal stress and help avoid overheating. As technology improves, lithium polymer batteries will continue to become more effective; however, their safety still can’t compare with that of lithium ion batteries.
Ασφάλεια
Manufacturers have designed several safety features into lithium polymer batteries to prevent their failure due to heat. For instance, they limit the amount of active material to achieve an equilibrium between energy density and safety; include multiple protective devices in cells; and have an electronic protection circuit monitoring the cells which automatically shuts down when its internal temperature becomes too high.
Another method used to keep temperatures under control is with a thermal management system. The system consists of interconnected thermal pads that conduct away the heat from individual cells while also cooling them by blowing air over them, thus helping prevent overheating and prolonging battery life.
Lithium polymer batteries can be extremely safe when used correctly. They do not spark fires like their liquid counterparts and heat related failures are relatively infrequent. Still, lithium polymers remain sensitive to external heat sources and should always be stored in a cool location away from direct sunlight or large heat sources such as heaters or stoves.
To minimise fire hazards, lithium batteries should be stored in a cool environment away from anything flammable, with an extinguisher nearby and regularly recharged if you plan to store a pack for more than three months.
Always use a charger designed specifically for LiPo packs and review the settings carefully, including cell count and current. Also keep away any metal objects which could potentially short circuit. When used in radio-controlled models it is highly recommended that a Lipo Sack be utilized.
Never attempt to “heat up” or increase voltage beyond 4.2V per cell in order to improve performance; these devices often claim otherwise but may actually increase fire risks or damage equipment in the process.